AISI S100 Series – Beams
AISI S100 Series – Beams

Continuing Education Credits Available – 1 PDH Credit

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers Beams—one part of six sections of AISI S100 Series:

–  Introduction + Tension Member 
–  Elements 
–  Beams  
–  Columns
–  Bracing
–  Connections

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Roger LaBoube, Ph.D., P.E.Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$100.00 Add to cart
AISI S100 Series – Bracing
AISI S100 Series – Bracing

North American Specification for the Design of Cold-Formed Steel Structural Members (AISI S100-12)

This course covers Bracing one section of six sections of AISI S100 Series.

AISI S100 Series covers 6 sections as follows:

  • Introduction + Tension Member
  • Elements
  • Beams
  • Columns
  • Bracing
  • Connections

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Roger LaBoube, Ph.D., P.E.Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

$100.00 Add to cart
AISI S100 Series – Columns
AISI S100 Series – Columns

Continuing Education Credits Available – 1 PDH Credit

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers Columns—one part of six sections of AISI S100 Series:

–  Introduction + Tension Member 
–  Elements 
–  Beams 
–  Columns
–  Bracing
–  Connections

Roger LaBoube, Ph.D., P.E.Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$100.00 Add to cart
AISI S100 Series – Connections
AISI S100 Series – Connections

Continuing Education Credits Available – 1 PDH Credit

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers Connections—one part of six sections of AISI S100 Series:

–  Introduction + Tension Member 
–  Elements 
–  Beams 
–  Columns
–  Bracing
–  Connections 

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Roger LaBoube, Ph.D., P.E.Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$100.00 Add to cart
AISI S100 Series – Elements
AISI S100 Series – Elements

Continuing Education Credits Available – 2 PDH Credits

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers Elements—one part of six sections of AISI S100 Series:

–  Introduction + Tension Member 
–  Elements  
–  Beams
–  Columns
–  Bracing
–  Connections

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Roger LaBoube, Ph.D., P.E.Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

Price: $100

 

$100.00 Add to cart
AISI S100 Series – Introduction + Tension Member
AISI S100 Series – Introduction + Tension Member

Continuing Education Credits Available – 1 PDH Credit

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers Introduction + Tension Member—one part of six sections of AISI S100 Series:

–  Introduction + Tension Member  
–  Elements 
–  Beams
–  Columns
–  Bracing
–  Connections

Roger LaBoube, Ph.D., P.E.Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$100.00 Add to cart
AISI S100 Series : Introduction + Tension, Elements, Beams, Columns, Bracing, and Connections
AISI S100 Series : Introduction + Tension, Elements, Beams, Columns, Bracing, and Connections

Continuing Education Credits Available – 7 PDH Credits

AISI S100-12: North American Specification for the Design of Cold-Formed Steel Structural Members

This course covers 6 sections:

–  Introduction + Tension Member
–  Elements
–  Beams
–  Columns
–  Bracing
–  Connections

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures

Roger LaBoube, Ph.D., P.E.Dr. Roger A. LaBoube is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction to include: cold-formed steel beams, panels, trusses, headers, wall studs as well as bolt, weld, and screw connections. Dr. LaBoube is active in several professional organizations and societies, including a member of the American Iron and Steel Institute’s Committee on Specifications for the North American Specification for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a Registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$600.00 Add to cart
Back-to-Basics: Structural vs Nonstructural Members Webinar
Back-to-Basics: Structural vs Nonstructural Members Webinar

Continuing Education Credits Available – 1.5 PDH Credits

The North American Standard for Cold-Formed Steel Framing – Nonstructural Members, AISI S220, has been adopted into IBC 2015. AISI S220 was created to help delineate and eliminate the confusion between the engineering principles and requirements for cold-formed steel structural members and nonstructural members. The webinar will address the basic behavior of composite vs non-composite wall assemblies, as well as design requirements that differ between the structural and nonstructural member.

Presenter: Roger LaBoube, Ph.D., P.E.
Wei-Wen Yu Center for Cold-Formed Steel Structures
Presenter: Roger LaBoube, Ph.D., P.E.

Roger LaBoube, Ph.D., P.E. is Curator’s Distinguished Teaching Professor Emeritus of Civil, Architectural and Environmental Engineering and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science & Technology (formerly University of Missouri-Rolla). Dr. LaBoube holds B.S., M.S., and Ph.D. degrees in Civil Engineering from the University of Missouri-Rolla. Dr. LaBoube has an extensive background in the design and behavior of cold-formed steel structures. His research and design activities have touched on many facets of cold-formed steel construction including cold-formed steel beams, panels, trusses, headers, and wall studs as well as bolt, weld, and screw connections. He is active in several professional organizations and societies, including membership on the American Iron and Steel Institute’s Committee on Specifications for the Design of Cold-Formed Steel Structural Members and chairman of the AISI Committee on Framing Standards. He is a registered Professional Engineer in Missouri.

In order to receive credit for this course, you must complete the quiz at the end and pass with at least 80% for a certificate to be generated automatically

 

$100.00 Add to cart
Tech Note 360: Acoustic Insulation and Sound Transmission in Cold-Formed Steel Construction
Tech Note 360: Acoustic Insulation and Sound Transmission in Cold-Formed Steel Construction

Summary: Cold-formed steel has been widely used in commercial buildings, especially in non-load bearing (partitions) and curtain wall applications, and is increasingly used as primary structural members, such as beams and columns, or as load-bearing walls or partitions in commercial and residential construction. The acoustic performance of floors and walls is an important consideration for many buildings.

Disclaimer: Designs cited herein are not intended to preclude the use of other materials, assemblies, structures or designs when these other designs demonstrate equivalent performance for the intended use. CFSEI documents are not intended to exclude the use and implementation of any other design or construction technique.

 

$5.00 Add to cart
Tech Note 551e: Design Guide: Permanent Bracing of Cold-Formed Steel Trusses
Tech Note 551e: Design Guide: Permanent Bracing of Cold-Formed Steel Trusses

Summary: Prefabricated and site fabricated cold-formed steel trusses have proven to be efficient and structurally-sound roof structures. While roof trusses are the major component of the structural roof system, permanent bracing is also required to complete the system and ensure that it performs as designed. In this Tech Note, the basic requirements and design parameters for permanent bracing of cold-formed steel roof systems will be reviewed.

Disclaimer: Designs cited herein are not intended to preclude the use of other materials, assemblies, structures or designs when these other designs demonstrate equivalent performance for the intended use. CFSEI documents are not intended to exclude the use and implementation of any other design or construction technique.

 

$5.00 Add to cart
Tech Note 558b-1: Lateral Load Resisting Elements: Diaphragm Design Values
Tech Note 558b-1: Lateral Load Resisting Elements: Diaphragm Design Values

Archived with cover page Nov. 2011

Summary: This note was archived November, 2011. The author has developed ASD design tables using an analytical method for wood framing based on the provisions of the 1991 edition of the AFPA National Design Specification for Wood Construction. Additional research is needed to bring the data in line with current codes and standards. The data below is from commentary section D2.1 of American Iron and Steel Institute AISI 213, Standard for Cold-Formed Steel Framing – Lateral Design.

Disclaimer: Designs cited herein are not intended to preclude the use of other materials, assemblies, structures or designs when these other designs demonstrate equivalent performance for the intended use. CFSEI documents are not intended to exclude the use and implementation of any other design or construction technique.

 

$5.00 Add to cart
Tech Note 559: Design Considerations for Flexural and Lateral-Torsional Bracing
Tech Note 559: Design Considerations for Flexural and Lateral-Torsional Bracing

Summary: Load bearing cold-formed/light gauge steel (CFS/LGS) framed walls are typically designed for a combination of axial and lateral out-of-plane (flexural) loading. Under this loading condition, common C-section studs may be susceptible to local, torsional, flexural, torsional-flexural, lateral-torsional or distortional buckling. The response performance of the stud depends on a number of parameters most notably how it is supported along its length (including its ends), the relative magnitudes of the applied loads and the distribution of these loads. This Technical Note discusses the behavior of the typical wall stud and provides some practical considerations for design of torsional-flexural and lateral-torsional bracing. Recommendations and considerations suggested in this technical note are done in accordance with acceptable practices and existing design documents.

Disclaimer: Designs cited herein are not intended to preclude the use of other materials, assemblies, structures or designs when these other designs demonstrate equivalent performance for the intended use. CFSEI documents are not intended to exclude the use and implementation of any other design or construction technique.

 

$5.00 Add to cart